| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GTJ000X |
| Title: SEAT: REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
(a) Install the rear No. 2 seat assembly RH.
NOTICE:
Be careful not to damage the vehicle body.
|
(b) Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely. |
(c) Install the 2 bolts.
Torque: 37 N·m (374 kgf·cm, 27 ft·lbf)
|
(d) Install the 2 bolts. Torque: 37 N·m (374 kgf·cm, 27 ft·lbf) |
2. INSTALL SEAT TRACK BRACKET FRONT COVER INNER
|
(a) Engage the 2 guides and claw and clip in the order shown in the illustration, and then install the seat track bracket front cover inner. |
3. INSTALL SEAT TRACK BRACKET FRONT COVER OUTER
|
(a) Engage the 2 guides and 2 claws in the order shown in the illustration, and then install the seat track bracket front cover outer. |
4. INSTALL DECK BOARD BRACKET
5. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
6. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
7. INSTALL ROPE HOOK ASSEMBLY
8. INSTALL LUGGAGE COMPARTMENT TRIM BOX
9. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|